1. What size machine?
Maybe the first consideration when deciding on a mini digger is: How large should it be? The generic term ‘mini’ is applied to all kinds of machines, typically ranging in dimension from the smallest, at about 1 tonne, to machines that weigh in at 10 tonnes. Check the size of the dig site carefully to ensure the machine you are hiring will fit in.
2. How deep will you’ll want to dig?
It’s worthwhile to consider how deep the trenches or holes you propose to dig need to be, and be sure that the digger model you hire has a protracted sufficient range of extension to do the job. Too quick an arm, and you’ll wind up with trenches shallower than you had planned for. ‘Dig depth’ is a due to this fact a key criterion when selecting a digger.
3. How huge do you wish to dig?
The width of your trenches is another vital factor you’ll want to consider, as bucket sizes (i.e. the digging implement itself) fluctuate enormously in size. With the fitting width bucket, you will be sure of digging precise trenches in steady arcs. Too slim a bucket will end in a messy try and carve out leftovers, while a too-massive bucket will depart you scuppered, perhaps needing to fill in the trench walls.
4. What height are you dumping at?
This is dependent upon your skip or dump truck, however watch out to make sure that your mini digger hire Basildon digger can attain high enough to dump the excavated material. Think concerning the dig zone fastidiously and the likely place of the digger relative to the skip. If the latter is on higher ground, you’ll have to consider a larger digger.
5. How heavy is the machine?
This is a vital factor for consideration, because as we have stated, the load of diggers varies considerably, and that can cause problems should you’ve not thought rigorously concerning the load-bearing capability of the site, in addition to any access roads or bridges. Plan ahead and ensure that any surfaces that must bear the load of your digger are up to the job.